Yeessss. Danger 5 is amazing.

I feel like this needs to be an album cover with those 3 songs and have it be prog as fuck. I need to listen to Renaissance again.

Do you have a KitchenAid stand mixer or anything like that? Best thing I ever learned is making ice cream with dry ice. I just put the base in the mixer, start it with the paddle, and start putting in crushed up dry ice, one spoonful at a time. I managed to get dry ice in the little cubes or pellets, put it in a cloth sack, and then use a hammer or blunt object to break it up into small pieces.

Yeah, I think I remember something like 10-20k to refill the cooling on an MRI, and that is just topping it off as some is slowly lost. The helium is just used to cool it. Helium is helium, so no such thing as medical vs not. The cost to repair this thing is going to be absurd. They are making better machines now have little to no loss, but I don’t think those are super prevalent yet.

It works amazing if your throat or sinuses are infected. I have taken 800mg of pills and barely take the edge off. 100-200mg of children’s liquid ibuprofen is complete relief and it tastes good. Once in a while I will get a bad sinus infection that ends up in the back of my throat and the pain is so bad I can’t swallow water. I got the trifecta once that included my ears and I had to get some drops from the doctor.

I have to use hotdog. I have EOE and got a round one stuck in my esophagus for hours once. The hotdog ones break easy. I basically bite it into thirds and can safely take them that way. I could never break the round ones.

Ah, so I really did mean the 10 & 2 for figuring out that positioning of the seat/wheel only. I absolutely agree that 10&2 is a terrible position for driving. 9&3 is much better.

I read an article a while back on how to position the wheel, as it is especially a problem for women. Airbags can absolutely kill you and I spent some time readjusting everything to make sure the airbag would not deploy in my face or too close to my chest. Adjusting the seatbelt height thing is also really important, but with breasts the damn thing still drifts to where it shouldn’t. Just not as bad.

Absolutely check with the women in your life about this as a lot of us don’t think about it until we get in an accident and the airbag and seatbelt do more damage than the crash. I am lucky I have only had a minor crash once with no airbag deployed. There are ways to get pedals adjusted by the dealership or swapped with longer ones. I assume mechanics can probably do it too, but I personally do not know how that all works.

I don’t have much experience with manual, but I do have severe ADHD. From my experience, it takes about 6 months of driving every day before your brain does most of it automatically. It is really awful at first having to constantly think about every step. Couple random anecdotes that may help. My assumption is you are driving on the right:

1. Drive barefoot or with minimalist shoes. You can really feel the car and road this way. Flip flops are a no no. All it took was them getting caught in the pedal once to never do it again.
2. Leave lots of space in front of you in high traffic situations. If you are sitting in the far right/exit/slow lane a lot it will help other drivers get around you. If it is a mulilane highway, it may be safer to stay in the middle lane until it is time to exit.
3. Look left first. Oncoming traffic hitting your driver side door is bad.
4. If you ever ever doubt when looking both ways, just look again. People can wait.
5. People get mad or do stupid shit. It is ok. We stop being rational people once “time” enters the equation. At some point, getting mad at other drivers all the time makes you a worse driver. Learn to just let shit go.
6. Try to space yourself where you don’t create blindspots for yourself or others.
7. Position your side mirrors properly. If you can easily see you car door, they are pointing in too far.

Adjust your seat and steering wheel. You want the steering wheel far away from your face. If you have an adjustable steering wheel, this will be a lot easier. There is a little lever you can pull to unlock it.

1. Unlatch the wheel and push it completely away from you.
2. Adjust your seat first so you can reach the pedals and feel in control of run. Test how it feels to push the brake, clutch, etc.
3. Now, adjust the steering wheel. Put your arms straight out. You want your wrists to touch the “10&2” position of the wheel.
4. Keep the steering wheel as low as you can, but still see the instruments, and make sure there is plenty of space between you and the very deadly airbag. You do not want it hitting your face and it needs enough space to deploy to properly protect you
5. Make final adjustments as needed and recheck your mirrors.

Eh? I have definitely gone around topless in NY a couple times and wasn’t bothered over it. To be fair, it was Pride. To be extra fair, it was almost 100 and everybody was dying. I do remember a couple times on the news where they would have to remind the police in NYS that it is legal on a couple roasting summers. I am definitely not the best at keeping the bits well covered in general. Still far better up here than when I used to live in Texas.

It was the SCADA view right? A lot of SCADA software is basically running on top of windows, though you typically would never see the desktop. Ignition at least is cross platform, but that is because the server is Java and Jython. A big part of why things are running on windows is due to OPC, which was traditionally all DOM and .NET. It is basically a standard communications protocol and is what allows your HMI/SCADA to communicate with PLCs. Otherwise, you use proprietary drivers and native PLC specific protocols.

SCADA programming/design is kind of an art and is usually written by an either an overworked engineer or someone who had far too much time on their hands. You basically build screens using specialized software, hook up buttons and UI elements to PLC signals, and pass some signals from the UI to the PLC. They are all heading in the Edge/iot/cloud/web based/techno-babble direction these days…

Ignition, programming software is free!: https://inductiveautomation.com

Some other random ones I have seen or used in the past: https://www.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html https://www.aveva.com/en/products/intouch-hmi/ https://www.rockwellautomation.com/en-us/products/software/factorytalk/operationsuite/view.html

Thank you for answering the question! I am genuinely both trying to make a point and still be open to try new things. To me, there seems to be a real downward turn on UI/UX in a lot of applications these days, corporate included. When they mentioned the bit about supporting corporate, I have a hard time believing they will get very far with that customer group right now.

I really wish software, especially FOSS, would stop making the UI the afterthought. I try to keep a holistic view when designing things and everyone has a seat at the table. I wonder if projects are boxing themselves in and making it harder for the UI teams to properly integrate, and vice versa? I will happily take criticism and ideas from pretty much anyone, especially outside my immediate teams.

I am pretty out of the game on that as I spent quite a few years doing controls engineering instead. I am back in Software now and I feel old and a little lost. I graduated back in 2012 and we didn’t have all of these crazy developer roles and more specialized degrees. They were trying to get a Game Design program started when I graduated, and it was supposedly a mess for a few years.

But my question is about the user experience and UI. I can run a docker script, but I care about the thing I can see and interact with.

All I read is Marketing Tech Speak that sounds no different than anything else that gets advertised in my face. At work, we use Teams. It is a pain sometimes when it gets a little buggy, but integrates into SharePoint/OneDrive and the noise suppression in meetings is pretty awesome. At home I use discord or GChat because that is where all my friends are. I don’t assume I have privacy on any of these platforms and they all work on my phone and computer.

How is the user experience? Ultimately, give me privacy, but if the user experience and UI don’t give any improvements over the corporate ones, I will have to try it some other time.

I am sorry, but PSL is damn delicious. It didn’t taste right last year and there were even some comments on Twitter about it. Starbucks swore they didn’t change the recipe, but I am convinced they were lying. This year, it tastes like it used to. No more sort of burnt caramel taste. Yay tasty beverage!

Now, go have one! It is ok to like the “trendy” thing. Maybe have them tone down the sweetness. Or find a non-Starbucks version at a local cafe. Or don’t. More for me!

That is some definite bullshit. I am both a software developer and a controls engineer. That stuff irritates me to no end, but I also understand how these systems can fail. They will always protect themselves over the user/customer, so thus we suffer. Hell, I used to do Amazon projects on the controls/industrial side. Amazon had their own software systems that they built/stole running things overall, so thankfully I didn’t have to deal with trying to make them happy on the software side too. I much prefer programming the machinery.

Wtf. They must have screwed something up with a software update. Worst case you charge back, but that might get your account banned…

I always take it to my UPS store down the road instead of boxing it up and sending it out. You don’t package the item up at all. They scan the barcode on my phone and take the item. Done, return processed. If they steal it afterwards, not my problem since the code was scanned and you get a notification/receipt. They have a lot of strange locations you can take it to, including random big box stores.

Description, GIF of a giant pile of tires on fire in a field with lots of black smoke.

Yes. Even if you get bitched at. Decent people will just ask more questions until they get what they need from you. Better to give more information than none. Try your best.

Actually, sometimes going through every single step on how you ended up with the issue solves it… Done that a few times.

Ok. Let’s do this! If you have a 4 cup pyrex/microwavable measuring cup, it is much easier.

• Sauce pan with a lid. Nonstick is fine.
• 2 cups of rice using dry measuring cup
• 3 cups of water
• Salt if using unsalted butter
• 2 tablespoons of butter

1. Put empty pan on stove and set heat to medium-high. If these are steel pans, stick to medium. Go towards high if nonstick as it takes a bit to heat up.
2. Put water and butter in microwavable cup and throw it in the microwave until it starts to simmer, maybe 3 minutes? Depends on microwave and dish.
3. While you are waiting on microwave, put dry rice in pan and gently stir/fold. They will start to turn white, but don’t let them burn. If you need to take the pan off and turn the heat down, do it. We are just preheating the rice and pan up. Add salt if needed.
4. Get ready. As soon as that water is hot enough to boil or close to, take it out, pour it in the pan. It will be violent.
5. Do a quick stir, throw the lid on, and turn the heat down to the lowest setting. The water should fully cover the rice.
6. Walk away. The bottom might toast a little, but that is fine as long as it doesn’t full on burn.

After 20 minutes or so, you can do a real quick check and if it looks kind of wet, throw the lid back on and wait.

At this point, you should have perfectly acceptable rice. Take the lid off, stir the rice with a more folding motion to let it steam any additional moisture out.