Hi there,

I am pretty new to Linux, so apologies for any stupidly obvious answers I might miss; I have a Raspberry Pi with some self hosted stuff to use in my LAN - however I have recently decided to host a Gogs (git) server on there also (as well as a Wordpress server).

Heres the issue - my Plex server is accessible from WAN, the Wordpress server is half working and the Gogs server is only accessible from LAN.

Basically if I connect to the server with LAN IP it works, if I use WAN IP it doesnt (The server at IP is taking too long to respond). One weird thing I noticed is that the Wordpress server - if I try to go to that via WAN IP it doesn’t work, but if I go via the DNS it works fine.

The Gogs server is using Docker, Wordpress just uses nginx. I have a static IP and have forwarded the correct ports on my router, I also have a new modem for fibre that I have not used before - not sure if that matters.

I’m mostly focused on getting the Gogs server accessible from WAN, I’m not too fussed about Wordpress right now since that works via DNS anyway.

Really appreciate any possible solutions you guys might know

  • Weslee@lemmy.worldOPEnglish
    1·
    1 year ago

    Thank you, I will try there, I was trying to install PiVPN since I can connect to the Gogs server on my local network, if I could just get a VPN server running it should work, but of course more issues with that. The cause could well be some config I might have changed and forgotten about, reimaging and starting fresh might be the easiest solution.

    Though, I did just upgrade to FTTP - which added a modem or some kind of device between my router and the internet, so maybe there could be some extra config surrounding that I’m just not aware of

      • haui@lemmy.giftedmc.com
        2·
        1 year ago

        This. I was getting fits when I read the post. Fiber is actually great for selfhosting a service but the security side is very dangerous for uninformed individuals.

        If configuring an nginx server is already stretching it, its only a matter of time until your stuff is encrypted and ransomed. Same goes for all data in your network. If the pi is not in its own zone, it has now become a door to your network with barely a lock, let alone a good one.

        I would highly recommend reading up on network security and probably prioritize isolating the pi and making at least daily backups.

        You router is going to be scanned for open ports every couple minutes. If the wordpress doesnt have a strong password, you‘re in for a bad time.