• notepass@feddit.de
      link
      fedilink
      arrow-up
      13
      arrow-down
      1
      ·
      1 year ago

      If I remember correctly: If it is watertight, replaceable batteries are not required. EZ way to skirt around this stuff.

      • AnonStoleMyPants@sopuli.xyz
        link
        fedilink
        arrow-up
        18
        arrow-down
        2
        ·
        1 year ago

        Nah.

        To ensure the safety of end-users, this Regulation should provide for a limited derogation for portable batteries from the removability and replaceability requirements set for portable batteries concerning appliances that incorporate portable batteries and that are specifically designed to be used, for the majority of the active service of the appliance, in an environment that is regularly subject to splashing water, water streams or water immersion and that are intended to be washable or rinseable.

        From here: https://www.europarl.europa.eu/doceo/document/TA-9-2023-0237_EN.html#title1:~:text=(39)   To,by end-users

        So watertight is definitely enough of a reason.

        • _haha_oh_wow_@kbin.social
          link
          fedilink
          arrow-up
          10
          arrow-down
          2
          ·
          edit-2
          1 year ago

          Except this is a bullshit exception because not only is it 100% possible to make waterproof devices with replaceable batteries, they have existed for years already. There is absolutely no technical reason for this, and the exception probably only exists because the corporations influenced the legislators to effectively gut the law.

        • scarilog@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          I don’t think a phone counts as that since it’s not something that’s expected to be regularly subject to water

      • _haha_oh_wow_@kbin.social
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        That’s really stupid, waterproof phones with replaceable batteries are certainly possible and have been done before.

    • riodoro1@lemmy.world
      link
      fedilink
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      Until you use some of that money for lobbying political influence they don’t.

      Facebook can get away with advertising literal scam to kids and old people alike and there are no consequences for them.

    • WaLLy3K@infosec.pub
      link
      fedilink
      English
      arrow-up
      23
      arrow-down
      1
      ·
      edit-2
      1 year ago

      To be fair, accidental damage is never covered under “warranty” (or any other extended service guarantee “warranty equivalents”) from any manufacturer. Given these black rectangles go everywhere with us, it’s still very good to have a device that won’t absolutely crap itself as soon as it gets dropped in water.

      I say this as someone who often sees customers bring in water damaged devices, wanting their data off of it.

      Frankly though, I wish the term used was “water resistance” and not “waterproof”. That semantic annoys me.

      • eek2121@lemmy.world
        link
        fedilink
        arrow-up
        13
        arrow-down
        1
        ·
        1 year ago

        You should read AppleCare+ ToS before you make that claim. They will absolutely let you file a claim for accident damage (it is spelled out in the ToS).

        • WaLLy3K@infosec.pub
          link
          fedilink
          English
          arrow-up
          14
          ·
          edit-2
          1 year ago

          AppleCare is not warranty (but is an equivalent), while AppleCare+ is the equivalent of insurance. I’ve edited my post to clarify this a little better.

        • WaLLy3K@infosec.pub
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          Since Apple make no distinction between “malicious damage” and “accidental damage”, then everything is called accidental. However, there are times where accidental damage is covered under warranty (or rather, a “service program”) when there’s an issue that’s widespread enough that is attributed to a manufacture or design defect – the warping of the plastic on the bottom of the Late 2009 Macbook comes to mind.

        • qarbone@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          1 year ago

          Nah, an overbearing parent smashing a phone to “teach them a lesson” isn’t an “accident”

      • abhibeckert@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        1 year ago

        I wish the term used was “water resistance” and not “waterproof”. That semantic annoys me.

        In my experience they are waterproof. I have AppleCare+ so if my phone were to suffer water damage it’d be relatively cheap to get it fixed, and I fairly frequently expose my phones to water. I’ve never lost one to water damage so far.

        My understanding is the water proof glue can in theory be damaged if it’s exposed to extreme temperatures and the like - that’s why Apple doesn’t cover water damage for free. But I’ve done that too (I’ve had my phone shut down with a temperature error a few times - usually when it’s on my motorbike in the full sun for an extended period of time with a map open… it’s fine while riding with the windchill but if you park the bike or get stuck in traffic, then it can overheat). Mine still hasn’t died int he rain including 60mph driving rain (on the motorbike…) which it’s supposedly not designed to handle. Every time that’s happened I haven’t really had a choice. I’d rather get where I’m going than stand in the rain parked on the side of the road waiting how long, five minutes? three hours? for the rain to stop.

        The one time I have lost a phone to the water damage it wasn’t water it was extreme humidity. So I suspect putting the phone in a backpack, and then riding a motorbike in the rain, will actually increase the risk. Proper water has surface tension that stops it entering microscopic gaps. Humidity doesn’t do that. And the inside of a backpack is never dry on a motorbike in the rain.

      • Zak@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Frankly though, I wish the term used was “water resistance” and not “waterproof”. That semantic annoys me.

        Better is to use an ingress protection code, which provides standardized ratings for exactly how dust and water resistant a device is. Apple does use IP codes and rates the latest iPhones as IP68: dust-tight, submersible at a depth and duration specified by the manufacturer. Apple specifies “maximum depth of 6 meters up to 30 minutes”.

      • avater@lemmy.world
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        1 year ago

        Im curios how often do you drop your phone in water? I swear to god in my now 35 years, I never lost a phone nor a smartphone due to water damage…

        • LonelyWendigo@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          I don’t need to be careless or have any real danger of dropping my phone in water to worry about water protection; humidity, sweat, rain, accidental splashes from a sink, spilled drinks, children, etc. are all very real often unpredictable water risks I might have very little opportunity to realistically avoid. I’ve seen those water detection stickers indicate water on devices that I know for a fact have been babied and never dunked for even a moment. Often humidity and a sweaty pocket were the only likely culprit.

        • loobkoob@kbin.social
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          About 20 yeses ago - pre-smartphones - my sister lost a phone to water damage. It was in a backpack pocket during a camping/hiking trip and the backpack got rained on a lot. Everyone else’s phone was fine because they were kept either in waterproof backpack compartments or in trouser/waterproof coat pockets.

          Around the same time, I also had a friend whose phone was broken when we were rafting and the raft capsized. The rest of us on the raft had left our phones at home because _why would you risk bringing a mobile phone on a homemade raft?!_

          Those are the only two instances I know of personally where someone’s phone has been destroyed by water damage and it hasn’t just been an “oops I dropped it in the toilet” situation (I’m still not sure how people manage that). And even the second example was still due to stupidity, I think - there’s a reason the rest of us didn’t rake our phones on the raft. My sister’s phone being damaged in the backpack is the only one that didn’t feel preventable, and where a water resistance phone would genuinely have been a good thing.

          • kite@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            “oops I dropped it in the toilet” situation (I’m still not sure how people manage that).

            Have a sweater or a jacket on, put the phone in your pocket. Do your duty, turn just a little too fast when going to flush, and your phone flies out of your pocket and arcs right into your doody.

            :(

        • abhibeckert@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          1 year ago

          I get caught outside in the rain unexpectedly about a dozen times a year living in a tropical city where it can go from dry to raining so heavy you can’t see the other side of the street with about 30 seconds warning.

          Those powerful storms are often very small and they might only rain for a minute or two. It’s impossible to predict when they will pass over, the city might be hit by 50 or so of them in a single day, but they’re so small most of the city won’t see any rain even though it technically rained 50 times somewhere in the city.

          Despite being small they it can be heavy enough to cause flash flooding. The city has pumps that can force 70,000 litres of water per second out of the city and into the ocean (before that, it was near impossible to live here).

          I carry a dry bag for my laptop and headphones everywhere I go, I guess I’d be putting my phone in there too, which will be annoying.

        • claycle@lemm.ee
          link
          fedilink
          arrow-up
          1
          arrow-down
          1
          ·
          1 year ago

          People read their phones on the toilet - probably every single modern phone user has done it at least once. It is not inconceivable that a small, but significant, number of them have fumbled the phone and it has fallen into the bowl.

          Likewise, pools, beaches, and boats are places people are very likely to go with their phones in tow and in use. It is not unlikely some of those - one can assume - millions of instances have produced some contacts between phone and water.

          I ride a motorcycle and mount my phone on the handlebars for guidance. I spend a lot of effort keeping it dry and have actually lost a couple of USB cables (but not the phone, thankfully) to damp.

    • _haha_oh_wow_@kbin.social
      link
      fedilink
      arrow-up
      18
      arrow-down
      1
      ·
      1 year ago

      Even if that weren’t the case, waterproof devices with replaceable batteries have already been made for years. There is no technical reason water resistance precludes replaceable batteries. It’s just more bullshit.

  • Hazdaz@lemmy.world
    link
    fedilink
    arrow-up
    104
    arrow-down
    4
    ·
    edit-2
    1 year ago

    It is called a rubber o-ring.

    That’s how other companies have been making water-tight compartments for batteries and other things for literally decades now. But all of a sudden, Apple wants to pretend this is some unsolvable problem. For fucks sakes stop acting like this is some insane ask, goddamn it.

    No other government body is as consumer-friendly as the EU, so I really hope this bill passes and forces Apple to comply. I am so sick of the bullshit from these megacorporations who are so big they just don’t give a flying fuck about what consumers want. And on the flipside, there are going to be a million Apple apologists who will side with Apple on this topic. Those bootlickers only make things worse for everyone.

    • T156@lemmy.world
      link
      fedilink
      English
      arrow-up
      15
      arrow-down
      2
      ·
      1 year ago

      They tried asking before, with the charging connector. Apple effectively ignored them for about a decade, so they’re going with the firmer option now.

    • moitoi@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Govs should never ask. They must implement the regulation. The corporations are so greedy, they will follow for the money.

  • aluminium@lemmy.world
    link
    fedilink
    arrow-up
    66
    arrow-down
    3
    ·
    1 year ago

    So glad to see the Apple fans here aren’t a bunch of blind yesmen. With an R&D budget the size of Apple’s I am sure theres a way to figure somwthing out.

    • T156@lemmy.world
      link
      fedilink
      English
      arrow-up
      27
      arrow-down
      2
      ·
      edit-2
      1 year ago

      Especially since waterproof phones with replaceable batteries already existed. They aren’t exactly working from nothing.

      • JackbyDev@programming.dev
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        1
        ·
        1 year ago

        I remember dunking my flip phone into glasses of water as a party trick and it was totally fine. This would’ve been around 2010 or so.

        • scutiger@lemmy.world
          link
          fedilink
          arrow-up
          10
          arrow-down
          2
          ·
          1 year ago

          I don’t think anybody really cares about an extra half millimetre of thickness, especially if it means that you can save hundreds in replacement costs and extend its life by a few years. Nobody’s buying an iPhone and busting out the calipers to compare it to their previous phone.

          • Dark_Blade@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            I care. This thing’s already thick and heavy enough, and I don’t particularly care about popping the back off my phone to replace a battery. It’s like…once every two years that I have to replace it.

          • SulaymanF@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Apple’s sales fall and people don’t buy new phones because “it looks just like last year’s phone.”

          • T156@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            1
            ·
            1 year ago

            You also start running into usability issues. There’s only so thin a phone can be before it’s less of a phone, and more of a blade that’ll bend if you sneeze at it wrong.

    • ImaginaryFox@kbin.social
      link
      fedilink
      arrow-up
      16
      arrow-down
      1
      ·
      1 year ago

      Really refreshing to see Apple fans who have not forgotten they are consumers who have features they want as opposed to accepting whatever decision is made for them.

      Other site was a weird mix of people who seemed less Apple consumers and shared more in common with Apple shareholders with the lengths they’d go to defend things from Apple’s financial point of view.

      • Sephtis-6@kbin.social
        link
        fedilink
        arrow-up
        7
        arrow-down
        1
        ·
        1 year ago

        Indeed, I personally consider myself an apple fan but there are definitely things that are bad. People who think apple has done only good and defend them at all time are just imo thr worst.

  • oct_opus@lemmy.world
    link
    fedilink
    English
    arrow-up
    64
    arrow-down
    4
    ·
    1 year ago

    It seems they are not going to make batterie replaceable without a fight. The waterproof excuse is crap, they already don’t give us repairs if the iphone is « water dommage » and they can just make a new water resistant design around the new requirements

    • Rubanski@lemmy.world
      link
      fedilink
      arrow-up
      45
      arrow-down
      4
      ·
      1 year ago

      Same lame excuse they used for removing the headphone jack… Never forget what they took from us and the shitty trend they started in the industry

      • Hamartiogonic@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        18
        arrow-down
        2
        ·
        1 year ago

        I think the charging port is the next one to go. Just use wireless charging, roast the battery and buy a new phone when the battery finally dies after a few years. However, if the battery really is replaceable, it’s going to change the economics of this plan.

        • T156@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          1 year ago

          I don’t think so. They would still need a way to connect to the phone for diagnosis reasons and all that, or to connect to it via iTunes.

          That’s still wired, so they can’t get rid of it entirely.

          • Hamartiogonic@sopuli.xyz
            link
            fedilink
            arrow-up
            11
            ·
            edit-2
            1 year ago

            Just so you know, the Apple Watch no longer has a diagnostic port. It’s all 100% wireless now. Source

            Apple has been tinkering with this idea for a while now, and it’s already in use. Next, they just need to do the same thing with the iPhone, and they’re ready to ditch all cables.

          • Pyro@pawb.social
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            1
            ·
            1 year ago

            NFC or something to that effect can be forced"on" with their special charging connection… Or something like that

            Would be horrible for data rates but it could be done

    • Pons_Aelius@kbin.social
      link
      fedilink
      arrow-up
      37
      arrow-down
      2
      ·
      1 year ago

      The waterproof excuse is crap

      Yep. Galaxy S5, released 9 years ago with an IP67, removable battery, sd card and headphone jack with a back you could open with a fingernail.

      • Dojan@lemmy.world
        link
        fedilink
        arrow-up
        17
        arrow-down
        2
        ·
        1 year ago

        Yep. Galaxy S5, released 9 years ago with an IP67, removable battery, sd card and headphone jack with a back you could open with a fingernail.

        Spot on. They boast about how the iPhone is IP68, but IPX7 means…

        Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins

        There may be a tradeoff, but I’ll take this level of waterproofing with a removable battery over being able to dunk my phone under water for 2 hours without a removable battery. Like that’s an easy choice.

        It’s all moot anyway. This is just Apple trying to justify their anti-consumer standpoint of wanting to own the device after it’s been bought, like every other fucking manufacturer out there. We will own nothing and we’ll be happy about it.

  • ocassionallyaduck@lemmy.world
    link
    fedilink
    arrow-up
    53
    arrow-down
    4
    ·
    1 year ago

    What a horseshit excuse: add 6 screws on your backplate, give it a frame with center glass, add a grommet. Give a torque setting for the screws to have a good seal in your instructions. L

    Done.

    Samsung did this shit years ago in a phone with a replaceable plastic back.

    • NightOwl@lemmy.one
      link
      fedilink
      English
      arrow-up
      20
      ·
      1 year ago

      Don’t go pros have replaceable batteries too and get used in like the ocean?

      • Im_old@lemmy.world
        link
        fedilink
        arrow-up
        18
        arrow-down
        2
        ·
        edit-2
        1 year ago

        Yes, but they have a very sturdy case. The gopro itself (without the case) is not waterproof.

        Edit: looks like I haven’t kept up with the times (username checks out) and now they ARE waterproof even without the case.

        • OrgunDonor@kbin.social
          link
          fedilink
          arrow-up
          11
          ·
          1 year ago

          This is wrong btw.

          Since the Hero 5, Go Pros have been waterproof without the case. The current GoPro is waterproof to 10 meters without a case or 60 meters with the case.

          Compared to the current iphone which is only water resistant, so can be submerged for 30 minutes, upto 6 meters.

        • metaStatic@kbin.social
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          I mean if you remove the waterproof case you have a naked circuit board, if they could make that waterproof we wouldn’t be talking about this.

          or are you thinking about ancient gopros that needed an extra sealed case?

        • Sephtis-6@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          They are if i recall correctly(at least the newer ones) waterproof till about 30ft without the extra case and with it till 150ft or so. But the extra case is very thick and sturdy

  • yuriy@lemmy.world
    link
    fedilink
    arrow-up
    52
    arrow-down
    4
    ·
    1 year ago

    jeeeeesus christ, the idea that a component in your MOBILE PHONE will never need repair is a one-way ticket to fucking landfill electronics.

    add a gasket, holy shit it’s waterproof again!

    • ozymandias117@lemmy.world
      link
      fedilink
      English
      arrow-up
      24
      ·
      1 year ago

      I mean, they said it never needs to be repaired, so just offer a lifetime warranty if it degrades. Should be easy enough

  • abcd@feddit.de
    link
    fedilink
    English
    arrow-up
    50
    arrow-down
    2
    ·
    1 year ago

    It would be great if the EU steps back:

    Dear phone manufacturers. It seems to be impossible to build water resistant phones with easily replaceable batteries. So we have an alternative for you: In future you must provide a unconditional, professional battery replacement, free of charge for 10 years for each individual phone which is water resistant. Since the phones are so water resistant you also have to replace all water damaged phones free of charge.

    2 hours later Apple announces a keynote for next week. A week later Tim Cook presents us next years iPhone with an easily replaceable battery…

  • CriticalMiss@lemmy.world
    link
    fedilink
    arrow-up
    47
    arrow-down
    2
    ·
    1 year ago

    Liars! Galaxy S5 was IP67. One of the Xperia phones (forgot which one) was also water resistant but without an IP rating. IIRC one of the HTC phones was also water resistant. At the very least Apple, don’t piss in our faces and tell us it’s raining.

  • inclementimmigrant@lemmy.world
    link
    fedilink
    arrow-up
    40
    arrow-down
    2
    ·
    1 year ago

    My old ass Galaxy S5 had a ip67 rating, dropped it into a pool once and still working to this day, so apple and the rest of these phone manufacturers can piss off with this flimsy excuse especially when they’re charging me hundreds of dollars.

  • TCB13@lemmy.world
    link
    fedilink
    arrow-up
    42
    arrow-down
    5
    ·
    1 year ago

    Apple needs to have a look at the new Surface devices: https://www.theverge.com/2023/6/14/23761037/microsoft-surface-spare-replacement-parts-microsoft-store and https://www.theverge.com/2022/11/11/23453263/microsoft-surface-pro-9-repairability-improved-ifixit-teardown

    Microsoft now sells Surface replacement parts, including displays, batteries, and SSDs / If you have a modern Surface device, then there are plenty of replacement parts to choose from.

    Microsoft’s Surface Pro 9 has (…) now has a screwed-in battery module as opposed to an adhered one. Between that and other components having become more modular over the years, repairability is actually achievable.

    But instead they’re already bitching to the press about this new regulations. This is the same crap they pulled with USB-C, still no USB-C iPhones whatsoever and unlike everyone else I’m not confident it will happen this year. To be frank Apple even decided to srew the customer even more by having newer iPhones come with USB-C to lightening cables and without a charger instead of plain USB-A.

      • TCB13@lemmy.world
        link
        fedilink
        arrow-up
        5
        arrow-down
        5
        ·
        edit-2
        1 year ago

        Well, still better than 1000$ for a new iPhone because you can’t replace it yourself, Apple won’t do it for almost the price of a new phone and they lock 3rd party batteries with serialization :) and you can buy 3rd party batteries for a fraction of the cost. What matters is that 1) you can replace the battery - no glued, soldered bs and 2) they actually sell them.

        • Dark_Blade@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          It’s not cemented into the chassis lol, Apple replaces it for $99 or you can just buy the part from ‘em and replace it yourself.

          • TCB13@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Yes the batteries are cemented into the chassis :D The last 3 times I tried to use the pull tabs they added they simply broke before the battery was out.

            • Dark_Blade@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              I mean, that sucks for you but pull-tabs are considered ‘repair-friendly’ by pretty much everyone in the Right to Repair movement.

              • TCB13@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                1 year ago

                I believe they might work for a bit of time, but with usage and eat they probably go bad and end up breaking. If you see on YouTube Rossman and others they’ve similar experiences.

        • Fiestorra@discuss.tchncs.de
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          1 year ago

          Yeah I agree, it’s better to be able to change them than not.

          Either way that price point still hurts for a battery (when an original standard enterprise laptop battery is usually less than half the price)

    • SulaymanF@lemmy.world
      link
      fedilink
      arrow-up
      6
      arrow-down
      11
      ·
      1 year ago

      Surface is literally twice the thickness of the iPhone (14 vs 7mm). That makes a waterproof iPhone with user-replaceable battery very very difficult, especially since users complained that iphones are heavier than previous models.

      • TCB13@lemmy.world
        link
        fedilink
        arrow-up
        18
        arrow-down
        4
        ·
        edit-2
        1 year ago

        iPhone with user-replaceable battery very very difficult

        Isn’t Apple allegedly good at engineering? I’m sure they could find a way. There are old Nokia phones that are as thick as current iPhones (or less) and have use-replaceable batteries. This has nothing to do with waterproof, its all about their continued interest in using planned obsolesce and other means to sell new devices.

        • abhibeckert@lemmy.world
          link
          fedilink
          arrow-up
          8
          arrow-down
          1
          ·
          edit-2
          1 year ago

          Being “good at engineering” doesn’t change the laws of physics.

          Those Nokia phones were not waterproof. Also, I’m pretty sure they were thicker.

          An o-ring only works if the battery cover is rigid enough that it will not flex at all even if, for example, you drop the phone in cold water rapidly cooling the battery cover while the internals stay warm for a minute or two.

          The battery cover will change size slightly with the temperature change and no screw can be strong enough to stop that. Covering the entire battery cover in glue and attaching it to the battery though… that will eliminate the movement.

          Perhaps Apple can find a water proof battery. But there’s no way they can keep water out of the battery compartment while being user serviceable.

        • SulaymanF@lemmy.world
          link
          fedilink
          arrow-up
          8
          arrow-down
          15
          ·
          edit-2
          1 year ago

          It’s always amusing when people who aren’t engineers assume something must be simple to make. Please show me a Nokia phone that was as thin as a current iPhone, with auto focusing video cameras (aka moving parts), and had a user-replaceable battery. I’ll wait. Samsung’s galaxy phones caught fire because they tried to make it just as thin with a user-replaceable battery (leading to short circuits), so that’s yet another thing you have to prevent in your hypothetical “it’s easy!” phone. Oh and it has to be rugged enough to withstand multiple drops like current phones AND not lose any of that thinness.

          Edit: okay the galaxy battery wasn’t replaceable but you still need to make higher tolerances in a user-replaceable item to prevent that, meaning it cannot be too thin for safety reasons.

          • ThrowawayOnLemmy@lemmy.world
            link
            fedilink
            arrow-up
            8
            arrow-down
            1
            ·
            edit-2
            1 year ago

            The Samsung note 7 that had the exploding battery issues wasn’t a removable /swappable battery, so you’re wrong. That whole phone was as glued together as iPhones of the time.

            Such a weird take.

            • SulaymanF@lemmy.world
              link
              fedilink
              arrow-up
              2
              arrow-down
              11
              ·
              1 year ago

              Good point, but that still supports my overall point; you’ll need higher tolerances to prevent shorts and fires which means you need thicker casings. A user-replaceable battery has thicker battery cases and connectors compared to devices where the battery isn’t accessible.

              Look at laptops for a similar story; making batteries user-inaccessible allowed them to shed thicker casings and instead fill more space when they weren’t constrained by a user compartment and casing and need for easy-detachable connector. Going back to a user-removable design in the exact same size case means slightly lower capacity batteries, which customers don’t want as a trade off.

              • TCB13@lemmy.world
                link
                fedilink
                arrow-up
                3
                arrow-down
                1
                ·
                edit-2
                1 year ago

                Did you even open an iPhone? Frankly speaking, if they didn’t have special screws and removed a few of the glued parts it would be more than a reasonable compromise to have to deal with their current connectors to replace a battery. The problem is that even if you have the proper screwdriver you’ll have to deal with glued stuff that won’t come out easily and sourcing batteries isn’t easy.

                “User replaceable” can be different from “open a back case with your finger and pop the battery out”. I believe if Apple did something like: remove 2 phillips screws from the bottom of the phone and then the back/front comes out (without single-use adhesives) and a battery hold in place by two other screws and one more for the current power conector it would be “user replaceable” enough for most people and situations. This would be simple changes to their current design that wouldn’t, most likely, require a change to the thickness of the phone nor a complete internal redesign while delivering a very huge improvement in repairability.

                • SulaymanF@lemmy.world
                  link
                  fedilink
                  arrow-up
                  4
                  arrow-down
                  1
                  ·
                  edit-2
                  1 year ago

                  This isn’t Reddit, we are actually nice to one another here rather than make stupid taunts.

                  Sigh, again it’s amazing how non-engineers assume this must be so easy and they’re condescending to boot. The iPhone 14 pro has a much bigger battery than the Samsung Galaxy S5, which was a benefit of miniaturizing other hardware and removing other circuits. Apple could make a phone with removable battery but then you’re talking about going back to a 2014 sized battery with hours shorter battery life. Basically erasing all the gains of the last 9 years. You think Apple should go and build a removable battery anyway and give up their lead and stay behind Samsung, who isn’t making battery swappable phones?

                  I know you think Apple is being intentionally sadistic and making phones of this design just to piss you off, but surveys show almost nobody swapped their phone batteries. Apple found an engineering advantage. And since you’re being a jerk on Lemmy, blocked.

          • TCB13@lemmy.world
            link
            fedilink
            arrow-up
            4
            arrow-down
            2
            ·
            1 year ago

            Hey, I never said it was easy, I just said that if Apple applied 35% of the engineering effort they apply into creating vendor lock-in, part serialization and other twisted anti-consumer “solutions” they would be able to accomplish it.

            • abhibeckert@lemmy.world
              link
              fedilink
              arrow-up
              3
              arrow-down
              1
              ·
              edit-2
              1 year ago

              No, it can’t be done. The iPhone is as thin as it is because the battery cover is glued to the battery. Take away the glue and it just can’t be that thin (or at least, if it was that thin it would be too weak - you’d probably snap the logic board by just putting it in a pocket - sometimes phones get pressed against your leg and legs are round).

    • Skiptrace@lemmy.one
      link
      fedilink
      arrow-up
      15
      arrow-down
      1
      ·
      1 year ago

      It’s not even that hard. I had a Galaxy S5, which had Micro-B and a replaceable battery. It’s called using a Cover on your USB Port, and a RUBBER GASKET. It’s not rocket psychology.